Panel Graphic Recorder from 8 up to 256 channels

Are you tired of changing paper, pens and inks of your graphic recorders?

The PLR-8000 recorder allows to graph in real time from 8 up to 256 analog variables and from 8 up to 256 logic data, saving the data in its memory, giving alarms and presentation of graphics through its 999 virtual recorders on 15” TFT touch screen. In option, communication through radio or Ethernet by cable or WiFi networks is possible through a “gateway” module communication RMT, EMT, or WMT-1000.

Controllers for pH, ORP, EC, O2, CL, OZ, Turb. and ISE

It is no longer necessary to mount a transmitter for each pH, O2, etc. sensors!

The series FMC -5000 /VQ are field mounting 2 or 3 chemical variables, with relationship capabillity betwen each. They have direct input for chemical sensors and they give the control signal in the field, at the same time, they transmit the data by RS-485 Modbus. In option, communication by Radio or Ethernet networks, cable or WiFi mode, is possible through “gateway” adapters RMT, EMT or WMT-1000.

Programmable Field Control modules Have you ever wondered whether...

Avoiding wires between field sensors and control room!!!

The field mounting FMC devices, allows to read the signals and perform the control function directly in the field transmitting data by RS-485 Modbus saving the wiring cost. The programmed functions in the modules are executed independently by each one of them, and exchanging data through the FMC-1000/LM module with Linker function operating as communication master of the field bus.

Speed of Vibration Transmitters for monitoring of bearings

Would you know when your engine will fall-down?

These field mounting devices consisting of sensor and specific transmitter prepared for preventive control of vibration in bearings of heavy machinery by means a trending system activing alarms according several criterium. These models transmit RS-485 Modbus and 4-20 mA signal proportional to the vibration speed. Optionally can transmit by Radio, Ethernet cable or WiFi.

Dual loop transmitters with mA and Modbus outputs

Analog Signal Repeater between two remote points

Save wired costs in an overload instalation!!! 

Analog Signals Transmitter by Radio 868 Mhz or 915 Mhz

¿Would you like to transmit field signals with no wired cost?  

Many times is needing to have several measuring points distributed in plant or in field, in these applications the wired cost is often higher than the original instruments fare. The solution is feasible at present thanks to free band radio transmitters. The RDT-4000/... is the state-of-art all in one devices, capable to read up to two analog mA, mV, Pt100, Pulses, etc., variables and to transmit them via Radio from 250 devices max., in peer-to-peer or multipoint modes, to a radio-modem RMT-1000 linked by RS-485 or USB to a PLC or PC . 

Low cost devices for acquisition and introduction of analog and logic signals in Modbus

Save I/O cards connecting the field signals directly to the PLC by means of RS-485 MODBUS.

The DCM-4000 Series are field modules to introduce analog and logic signals in Modbus network linkeds to PLC or PC controllers to acquire and activate of control loops (as contactors, vlaves, etc.). Optionally can be linked by Radio, Ethernet (cable or Wifi)  networks by means RMT, EMT or WMT-1000 gateways modules. 

Public Display of Swimming Pool Healthy

Show the correct pH, Chlorine, etc. of your swimming pool!!!

The PSL-3600 system is a long size display for visible showing of ambient and healthy conditions of public swimming pools. It is composed by several long size digital indicators communicating with just one wire or radio link with its correspondents Temperature, %RH ambient remote transmitters and pH, Chlorine, Ozone, Turbidity and Temperature of the pool water.

Inductive Conductivity Sensors to 100 mS/cm^-1 and 2000 mS/cm^-1

Toroidal type to EC measures on very high conductivity solutions

New inductive conductivity sensors in toroidal shape in two versions with 100 mS and 2000 mS ranges for aplications in waste water treatment, chemical and farma industry. Built-in of Noryl with ATC by integrated Pt100 sensor. We are also suppliying field transmitters with 4-20 mA outputs, Modbus, Radio, Ethernet cable or WiFi, and field controllers FMC-.../ECT Series or BS, DS and MS-../ECT etc. for panel mount. 

Two-poles Conductivity Sensors from 0.01 uS/cm^-1 up to 20.00 mS/cm^-1 ranges

Whole Series to measuring from deionized water up to waste-water

We are manufacturing four models of two-poles conductivity probes with constants K=0.01 - K=0.1 - K=1 and  K=10  for aplications in water treatment, chemical and farma industry, etc. Bult-in Titany, Polipropylene and SS316 with ATC by integrated Pt100 sensor. We are also suppliying field transmitters with 4-20 mA outputs, Modbus, Radio, Ethernet cable or WiFi, and field controllers FMC-.../EC Series or BS, DS and MS-../EC etc. for panel mount.

IP65 SS enclosure controller with 15" color touch-screen 

Replace the old circular chart controllers and avoid paper and ink-pens costs

Multi-loop Graphic Controller, enlargeable from 6 to 64 PID loops, allows replace the old mechanic control devices  antiguos equipos mecánicos de regulación. Store the data of several years and it can show it in screen with search according the data.

Flowmeter to mounting on waste-water open channels or boxes

Accomplish the European Environmental Directives with the lowest cost.   

This low cost mounting system allows to measure, totalizer, average and peak flow at small open channel and to transmit all data by Modbus communication, and optionally also Radio or GSM. Also optionally can be powered by means our stand-alone ABF device with solar cell, allowing to mount in isolated areas.

Whole and finished Power Supply Systems by means Solar Panels

Is sure!!!, there are not current plugs in open field installations. 

The ABF Series are whole systems to power supply measure instruments on places with no local AC mains. They are 10... 20 W photovoltaic panels based suppliying 12 Vdc (or 220 Vac 50/60 Hz). The ABFR version includes a radio modem RMT-1000 to connexion of local instruments via Radio 868 MHz. The autonomy of this power supplies depends of consum and the solar hours of thearea, and can be enlarged by additional batteries.

Programable Logic and Analogic modules for Distributed Processes

Save PLC tasks by carry out the calcul and control in field!

The MAC-3500 Series are powerful modules for analog an d logic control, friendly programmables by Function Blocks for an easy realization of infinity of projects. The MAC-3500 Series allows to work as RIO (Remote Input Output) or directly like a PLC. Optionally, can be transmit by Radio, Ethernet cable o WiFi.

868 MHz or 915 MHz Radio Modem on IP65 enclosure for RS-485 or USB serial bus

Would you like communicate two RS-485 serial bus with no cable?  

Our radio modem RMT-1000 allow communicate two RS-485 or USB serial bus by means 868 MHz or 915 MHz (USA) radio-link trough long range distances, and according the selected power, type of antenna and the obstacles, it can reach from some hundred meters up to several Km. A difference of other devices of market, the radio modem RMT-1000 is 85..265 Vac powered and optionally 24 Vdc, into an enclosure IP65 for field mounting.

Industrial Pressure Transmitter for special applications

New Pressure Transmitter fully PVDF built-in to work in aggressive high media.

The enclosure is IP65 protection and the process connection is 1/2" G. The ceramic thick film sensor provides high accuracy of 0.5% FSO in ranges from 0…0.1 Bar up to 0...400 Bar, and 4-20mA output signal 2-wire by DIN connector. It is fully recommended for pressure measurement in very aggressive media or for applications where the sensor fill fluid is not allowed (i.e. Oxygen)

Thermal Sensor Transmitter for Gases or Liquids Speed

The DMM-4000/AFH and /LFH Series are field transmitters to mass flow speed measuring in gases or flow speed in liquids, with flow meter measuring capability by means of calculation with the pipe section introduction. They transmit the two variables in 0..4-20 mA and RS-485 MODBUS mode. These devices they are dedicate specifically to measure, calculation and transmission of speed and flow of fluid in industrial processes.

Level Transmitter with Guidewave Radar Technology

To measure Level with no problems of echoes, foams or gases!!

New Level Radar Transmitter by Guidewave Technology  of our represented SMAR. The RD400 is a level transmitter, independent of density and temperature variations and it is not affected by the viscosity, gravity or gases inside the tanks and turbulences in the process. Can be supplied in three versions, with HART protocol and 4-20 mA 2-wire output, or with Profibus PA, or with Fieldbus Foundation.

Compact devices designed for safety of structures against wind

“DESIN Solutions” Product Line

ADA-1000 Series are specific devices that fulfil the safety requirements according to ITC "MIE-AEM-2" for tower cranes in wind. It consists of a cup type anemometer and a uP based electronic circuit built in an IP65 enclosure, giving luminous and siren alarms when the wind speed reaches 50 and 70 Km/h. In option, a 4-20mA retransmission signal of the wind speed can be provided, as well as, communication port for monitoring from PC.

Multi-function Field Calibrator for virtually and process device

Allows the reading and sourcing of mV, TP, RTD, mA, Ohm signals with high accuracy

The MC-1000 is a hand-held calibrator for instruments calibration in the field with easy programming of calibration setpoints for each output function. The RTD works with all pulsed transmitters. With a simple connector/adapter, the MC-1000 is compatible with 25 different pressure modules (Fluke) Provided with RS-232 communication interface.

It is a transmitter with independent sensor for level measurement

If you looking for a high accuracy level transmitter provided with performances similar to Radar systems…this is your transmitter!

The SmartScan is 2-wire 4-20mA transmitter with 0.1% and 0.25% accuracy (depending on model) for level measurement up to 40m for liquids and solids. The new software technology included in these devices gives full compensation for errors due to rebounds and interferences in almost any environment that the current equipments available in the market cannot solve. It is provided with self-adjustment for almost all types of conditions with no need for further Calibration or Maintenance. It is used for monitoring and control in farm tank management applications, for liquids and solids, for which it is provided with calculation and linearization functions.

Mono-block construction transmitter (without display) for level measurement

If you are looking for low cost level measuring system in tanks, this is the transmitter you are looking for!

The MicroScan is 2-wire 4-20mA transmitter with 0.25% accuracy for level measurement up to 5m for liquids and 3.5 m for solids. It is provided with auto-adapted system without need of further Calibration or Maintenance. It is used for monitoring and control in farm tank management applications, for liquids and solids, for which it is provided with calculation and linearization functions. It is an OEM products specially designed for machinery manufacturers, engineering companies etc.

Mono-block construction transmitter with LCD display for level measurement

Do you have problems in adapting the level transmitter you are using to your process?

The MonoScan is 2-wire 4-20mA transmitter with 0.25% accuracy for level measurement up to 15m for liquids and 8.5 m for solids. The new software technology included in these devices gives full compensation for errors due to rebounds and interferences in almost any environment. It is used for monitoring and control in farm tank management applications, for liquids and solids, for which it is provided with calculation and linearization functions.

Bench Multi-Function Calibrator with Superior calibration accuracy to 0,0025% of reading (MC-2001)

One of the most accurate bench calibrator available in the market

The MC-2001, from Martel (USA), allows reading and sourcing of mV, TP, RTD, mA, Ohm signals with high accuracy. Easy programming of calibration setpoints for each output function. The RTD works with all pulsed transmitters. With a simple connector/adapter, the MC-1000 is compatible with 25 different pressure modules (Fluke). Provided with RS-232 communication interface.